พาวเวอร์แอมส์ POWER AMPLIFIER QSC CMX800V

POWER-AMP (เพาเวอร์แอมป์) > QSC

[

คลิกเพื่อดูภาพขยาย]

รหัส : CMX800V

ยี่ห้อ : QSC

รุ่น : CMX800V

ราคาปกติ : ~~36,000.00~~

ราคาพิเศษ : 30,600.00

รายละเอียดย่อ :

POWER AMPLIFIER 800 W/CH @ 4 Ohms Stereo drive 70 and 100V

รายละเอียดทั้งหมด :

CMX300V | CMX500V | CMX800V | CMX2000V

Contractor "Flex-Use" Specific Features
The CMX Series is packed full of professional features that increase
performance and flexibility.

"Flex-Use" loading options allow you to drive low-impedance loads down to 2 ohms and certain models to drive 70 and 100V distributed loudspeaker systems
"Flex-Use" Input connectivity choices including actively balanced barrier strip, XLR, or 1/4" TRS
"Flex-Use" Output connectivity choices include NL4 Speakon™ and detachable terminal block
Rack mountable with chassis less than 16" or 40.6 mm deep
1 dB recessed, detented gain controls for fast, accurate and repeatable settings
Tamper-proof security cover for gain controls
Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and the additional choice of enabling/disabling low frequency filter protection
Low-noise variable-speed fans with rear-to-front airflow keep amplifiers and racks cool

Preliminary Specifications

SPECIFICATIONS	CMX300V	CMX500V	CMX800V	CMX2000V
	STEREO MODE (Both Channels Driven)
8 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.1% THD	185 W 200 W	260 W 300 W	450 W 500 W	1050 W 1100 W
4 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.5% THD	280 W 300 W	400 W 500 W	650 W 800 W	1600 W 2000 W (1% THD)
2 ohms EIA 1 kHz, 1% THD	430 W	700 W	1200 W	2500 W
70V Direct Drive EIA 1 kHz , 1% THD	-	-	400 W	2500 W
100V Direct Drive EIA 1 kHz , 1% THD	-	-	-	1000 W
	BRIDGE MONO MODE
8 ohms FTC 20 Hz - 20 kHz, 0.1% THD EIA 1 kHz, 0.1% THD	530 W 600 W	800 W 900 W	1300 W 1500 W	3200 W 3600 W
4 ohms EIA 1 kHz, 1% THD	830 W	1400 W	2400 W	5000 W
70V Direct Drive EIA 1 kHz , 1% THD	600 W	1200 W	2000 W	5000 W
100V Direct Drive EIA 1 kHz , 1% THD	-	600 W	2300 W	3600 W
Signal to Noise, 20 Hz-20 kHz, 8 ohms	> -100 dB	> -100 dB	> -100 dB	> -100 dB
Input Sensitivity @ 8 ohms	1.15V (+3.4 dBu)	1.15V (+3.4 dBu)	1.23V (+4.0 dBu)	1.42V (+5.3 dBu)
Voltage Gain @ 8 ohms	31.6x (30 dB)	40x (32 dB)	46x (33 dB)	64x (36 dB)
Output Circuitry	Class AB	Class AB	2-tier Class H	3-tier Class H
Power Requirements (120V) 1/8 power pink noise at 4 ohms 1/3 power pink noise at 4 ohms	4.4A 6.6A	5.4A 9.6A	6.3A 15.6A	13.9A 26.9A
Power Requirements (230V) 1/8 power pink noise at 4 ohms 1/3 power pink noise at 4 ohms	2.2A 3.3A	2.7A 4.8A	3.2A 7.8A	7A 13.5A
Distortion (SMPTE-IM)	< 0.02%	< 0.01%	< 0.01%	< 0.01%
	ALL MODELS
Distortion (Typical) 20 Hz - 20 kHz: 10 dB below rated power 1.0 kHz and below: full rated power	Less than 0.03% THD, 4 and 8 ohms Less than 0.03% THD, 4 and 8 ohms
Damping Factor, 1 kHz and below	Greater than 300 at 8 ohms
Input Impedance	10k ohms unbalanced, 20k ohms balanced
Input Clipping	10 Vrms (+22 dB)
Cooling	Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel	Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm) TRS tip and XLR (pin 2 positive) Output: detachable terminal block and Neutrik™ Speakon™
Controls	Front: AC switch, Ch. 1 and Ch. 2 gain knobs Rear: 10-position DIP switch
Indicators	Power-On: Green LED Signal: Green LED (1 per channel) Clip: Red LED (1 per channel)
Amplifier Protection	Stable into reactive or mismatched loads
Load Protection	On/off muting, AC coupling (CMX300V, CMX500V), triac crowbar (CMX800V, CMX2000V, on each channel)
Power Requirements	100, 120, 230 VAC, 50-60 Hz
Dimensions (HWD) 2RU Models 3RU Model (CMX2000V)	3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears 5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
Weight - net	35 lbs (15.9 kg)	40 lbs (18.2 kg)	44.5 lbs (20.2 kg)	75 lbs (33.1 kg)
Weight - Shipping	41 lbs (18.6 kg)	46 lbs (20.9 kg)	50.5 lbs (23 kg)	87 lbs (37.2 kg)

จำนวน